Warehousing Business
Standard Business
SPREADER
Tel: 0086-371-5532 8269 Ext. 1039 E-mail: inquiry@clescrane.com
© 2017 Henan Clescrane System Co., Ltd. All Right Reserved.
When you’re installing your new crane, something often overlooked is cab location. OSHA lays out specific requirements for clearance, lighting and fire safety.
Cab location
The general arrangement of the cab and the location of control and protective equipment shall be such that all operating handles are within convenient reach of the operator when facing the area to be served by the load hook, or while facing the direction of travel of the cab. The arrangements shall allow the operator a full view of the load hook in all positions.
The cab shall be located to afford a minimum of 3 inches clearance from all fixed structures within its area of possible movement.
Access to crane
Access to the cab and/or bridge walkway shall be by a conveniently placed fixed ladder, stairs, or platform requiring no step over any gap exceeding 12 inches.
Fire extinguisher
Carbon tetrachloride extinguishers shall not be used.
Lighting
Light in the cab shall be sufficient to enable the operator to see clearly enough to perform his work.
Pre | Load Handling |
Next | Overhead Crane Electrical Requirements |
Back | Help |